SIGMA
6000+
The infusion rate is selectable from 0.1 ml/hr to 999 ml/hr. And, since the 6000 Programmable Pump utilizes standard low cost (Abbott, Baxter Travenol or Kendall McGaw) micro and macro drip administration sets, it offers a high degree of versatility in tubing selection and operation. To ensure safety and ease of operation, the 6000 has a user prompting system and a full range of diagnostic alarms. Fluid flow protection is provided through an automatic safety clamp. |
SPECIFICATIONS
Operating Principle | Linear peristaltic |
Dimensions | 7-5/8" H x 3-5/8" W x 7-1/2" D (193 mm x 92 mm x 190 mm) |
Weight | 10.2 lbs (4.6 kg) |
Power Requirements | 105 - 135 volts AC, 50-60 Hz, 0.5 Amps. |
Battery Operation | Approx. 8 hrs - on fully charged battery (18 hr. charge time required) |
Grounding Resistance | <0.1 ohm |
Electrical Leakage | <10 microamp |
Operating Range | 0.1-999 ml/hr |
Accuracy | ± 5% |
Volume Limit Range | 0.1-9999 ml |
KVO Rate | 1 ml/hr, <1 ml/hr = infusion rate |
Occlusion Pressure | 12 ±6 psi |
Air in Line Detection | Air bubble in. (0.1 ml) or larger |
Alarms | |
Air | Proximal Occlusion/Empty Bottle (requires optional flow sensor) Program Complete Malfunctions: H/L Rate, Pump Fail, Multifail and Bad Prom |
Occlusion | Check Tube Open Door Infusion Complete Low Battery/Plug In |
ADMINISTRATION SETS | Standard administration
sets 2C5531 - 85", 10drops 6" & 70" from luer lock adap 2C5417 - 70" w/ 1 Y site 6" from needle to Adapter 1C8160 - 70" with Luer Lock Adapter 2C5431 - 70", 1 Y site 6" LL, 10 drops/ml |