SABRATEK 3030 IV Pump

The Sabratek 3030 infusion pump provides accurate, safe, and reliable volumetric delivery and can be used in both arterial and venous applications.

• The pump is easy to program and use. You simply agree or disagree with the pump's prompts by using the YES and the NO keys.
• The pump's Lockout mode makes it tamper-resistant by requiring a software access code to be keyed in prior to any parameter changes. This limits patient programming and profile selection while maintaining optimum compliance.
• The Sabratek pump offers four delivery profiles:
  1. Continuous profile - a continuous delivery of a single flow rate.
  2. Auto-Ramp profile - automatic, linear ramping (tapering) capabilities.
  3. Intermittent profile - delivery of a preset number of doses at regular intervals.
  4. 15 Periods profile - sequential delivery of up to fifteen different rates and volumes.
• Secondary (Piggyback) infusion can be delivered before or during the primary infusion. The pump automatically switches to delivering the primary infusion's rate when the Piggyback volume is complete.
• Titration allows the delivery rate and/or the volume to be infused to be changed in Continuous and in Piggyback profiles.
• The pump provides a choice of entering either a delivery rate or a delivery time for an infusion.
• You may delay the starting time of any profile (including Piggyback).
• Programmed infusion settings are recalled by the pump indefinitely, or until they are changed by the operator. There is no need to reprogram the parameters before each use.
• Turning the pump off during an infusion requires two separate keys to be pressed (decreasing the chances of an accidental interruption of an infusion).
• If the pump is turned off before an infusion is completed, the rate, volume-to-be-infused, and volume infused will be retained in the pump's memory,. When the pump is restarted, the infusion may be resumed exactly from where it was stopped.
• The audible alarm cannot be completely disabled. Quiet operation.
• Pump information can be displayed in either English or Spanish (other languages are optional).
• Pump displays the time remaining until the end of an infusion.
• The volume infused display can be cleared to zero
• The pump displays a flashing flow indicator arrow while the pump is infusing. It is displayed between the rate and the volume infused displays and flashes every one second