SYRINGE PUMPS

MODEL DESCRIPTION CONDITION WARRANTY OUR PRICE
Medex Medfusion 2001 Syringe Pump

The Medex Medfusion 2001 syringe pump provides continuous or intermittent delivery whenever meticulous low volume drug or fluid injections using a syringe are required in the hospital. A unique feature of the Medfusion 2001 is the custom program mode which allows preselection of certain infusion modes and parameters. Thus, the custom program mode accommodates programming to meet a specific need. Those needs are customized by selection of the number/type infusion modes, the maximum infusion rate, the alarm volume, the alarm temporary delay time, volume limit, KVO rate, and alarm types. Additionally, this mode offers the health care professional and biomedical engineer a lockout feature which limits access to assure programming reliability.
Refurbished
1 year $945.00
i

Medfusion 2010i Syringe Pump

The Medfusion 2010i syringe pump offers flexibility for a variety of clinical needs, settings and applications. The pump may be utilized whenever meticulous low volume drug on fluid injections using a syringe are required in the hospital. The 2010i may be field customized for specific applications. A choice of 4 modes of delivery are available: Body Weight Mode, Mass Mode, Continuous Mode and Volume Over Time Mode (dose volume/delivery time). In addition, the pump has the ability to store up to 64 user regimens/protocols. A bolus may be programmed, then changed or administered at any time prior to or during drug delivery.

Refurbished
1 year $1,395.00
i

IVAC MedSystem III Multi-Channel Infusion Pump

One-third the size and weight of most single-channel devices, the MedSystem III Infusion System takes on huge tasks, yet takes up very little space. By significantly reducing bedside clutter, the MedSystem III Multi-Channel Infusion System creates a more efficient clinical environment.
Refurbished
1 year $1,375.00
i

Baxter AS40 Syringe Pump

Digital syringe pump, provides accurate, continuous and intermittent infusion through intravenous, intra-arterial, subcutaneous or epidural methods of infusion. Accepts disposable standard syringes sizes from 1 mL to 60 mL.
Refurbished
1 year $1,150.00
i

Bard 150XL Syringe Pump

The Mini-Infuser System is designed for controlled intermittent delivery of intravenous medication. The 150XL is a single rate syringe pump. The 150XL runs at 5.5 in/hr. The pump operates on four C-size batteries, which typically provide about 400 hours on minimum speed. The pumps us BD and Monoject syringes from 5-60ccs.
Refurbished
1 year $450.00
i

Bard 300XL Syringe Pump

The Mini-Infuser System is designed for controlled intermittent delivery of intravenous medication. The 300XL is a variable (3) rate syringe pump. The 300XL will run at Low (1.8 in/hr), Low (2.7 in/hr), and Med (5.5 in/hr) speeds. The pump operates on four C-size batteries, which typically provide about 400 hours on minimum speed. The pumps us BD and Monoject syringes from 5-60ccs.
Refurbished
1 year $720.00
i

B. Braun / McGaw BD 360 Syringe Pump


The Excelsior ESP Syringe Pump is similar in appearance and operation to the Baxter 300XL. Like the 300XL, it features three motor speeds which allow the clinician to set the time of delivery, and accepts most syringe sizes. Using the plug-in adapter (shown at left), the pump can also infuse solutions from 140 ml syringes which are available from Excelsior or Monoject. The adapter contains electronic components inside the plastic piece which supplement the internal pump motor electronics and allow the larger infusion; an extra-large syringe clamp will accept syringes of 3ml. up to the 140 ml. size. The time of infusion is also longer than the 300XL’s; in the slow mode, infusion time can be as long as 150 minutes.
Refurbished
1 year $495.00
i

Excelsior ESP Syringe Pump

The Excelsior ESP Syringe Pump is similar in appearance and operation to the Baxter 300XL. Like the 300XL, it features three motor speeds which allow the clinician to set the time of delivery, and accepts most syringe sizes. Using the plug-in adapter (shown at left), the pump can also infuse solutions from 140 ml syringes which are available from Excelsior or Monoject. The adapter contains electronic components inside the plastic piece which supplement the internal pump motor electronics and allow the larger infusion; an extra-large syringe clamp will accept syringes of 3ml. up to the 140 ml. size. The time of infusion is also longer than the 300XL’s; in the slow mode, infusion time can be as long as 150 minutes.
Refurbished
1 year $650.00
i

Graseby MS16A Syringe Pump

Continuous intravenous or subcutaneous infusion rates with manual bolus doses. Water-resistant plastic case. Very small, can be worn in belt or shoulder holster for ambulatory operation. Push button Start/Test Switch, with 2 screwdriver-adjustable rotary rate switches. Uses one 9-volt alkaline battery. Used for very small infusions over long durations, usually 24-48 hours.
Refurbished
1 year $900.00
i

Graseby MS26 Syringe Pump

Continuous intravenous or subcutaneous infusion rates with manual bolus doses. Water-resistant plastic case. Very small, can be worn in belt or shoulder holster for ambulatory operation. Push button Start/Test Switch, with 2 screwdriver-adjustable rotary rate switches. Uses one 9-volt alkaline battery. Used for very small infusions over long durations, usually 24-48 hours.
Refurbished
1 year $945.00
i
 
     

Medis Infusa T Syringe Pump

High delivery accuracy. Battery: 9V alkaline PP3 size. Full set of protections and alarms. A.C.S. at start: Weight and dimensions:170 g including battery – 170 x 58 x 21 mm. Syringes: Most commonly available three part disposable syringes 5 to 20 ml. Speed: Operation adjustable from 1 to 12 mm/h in increments of 1 mm
Refurbished
1 year $620.00

PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE / PLEASE CALL TO VERIFY PRICES
DEPENDING ON AVAILABILITY / SHIPPING NOT INCLUDED


Live chat by BoldchatPlus
atPlus