|
ABBOTT
Plum XL The Plum XL, with DataPort Infusion Systems is a dual-line volumetric infusion system design to meet the growing demand for hospital wide device standardization. The infusion system provides primary line, secondary line, and piggyback fluid delivery capabilities to furnish a wide range of general floor, critical care, and home care applications. |
| Dimensions: | Approximately 8.25H x 7.5W x 8.75D inches (including pole clamp) |
| Weight: | Approximately 7.75 lbs (with battery) |
| Casing: | High-impact plastic |
| Power Requirements: | 100-130 Vac, 50 to 60 Hz, less than 35 W |
| Power Cord: | Hospital-grade AC (mains) cord. 10 feet long, with transparent plug. |
| Fuses: | 0.5 A, 250 V. slo-blo |
| Battery: | Sealed lead-acid rechargeable 8 V battery, internal to infusion system. Accessible for ease of field replacement, with color-coded leads and polarized connector. |
| Battery Operation: | A fully charged new battery will provide eight hours of operation at 125 ml/hr, or 1000 ml total volume delivered, whichever occurs first. |
| Recharge: | The battery charges whenever the infusion system is connected to AC (mains) power. If the infusion system is operating at 125 ml/hr, a full recharge takes approximately 16 hours. If the infusion system is turned to OFF/CHARGE, recharge takes approximately eight hours. |
Delivery Rate Range:
| Primary, Secondary Mode: | 1 to 999 ml/hr (in 1 ml increments) |
| KVO: | 1 ml/hr |
| Dose Limit Range: | 1 to 9999 ml/hr (in 1 ml increments) |
| Occlusion Range: | 10 psig (+5, -2 psig) |
